Tiktok:
  • 38843
    الترتيب العالمي
  • 656
    ترتيب الدولة / المنطقة
  • 1.31M
    متابعون
  • 795
    أشرطة فيديو
  • 17.43M
    الإعجابات
  • فيديو جديد
    21
  • متابعين جدد
    29.38K
  • طرق عرض جديدة
    50.6M
  • إعجابات جديدة
    576.65K
  • مراجعات جديدة
    4.75K
  • مشاركة جديدة
    53.68K

Kruger Construction  اتجاه البيانات (30 يوما)

Kruger Construction التحليل الإحصائي (30 يوما)

Kruger Construction فيديوهات ساخنة

Kruger Construction
This is the @Kneel It It’s great for installing floor, grinding floors and pretty much any task that you need to move around on your knees • They just added a chest support adaptor to help you lean forward and take the pressure off your back • This thing is completely tool free and we have never had a problem with it scratching a floor . . . #tools #construction #kneelit #floor #flooring
28.81M
377.64K
1.31%
4.1K
2.95K
29.71K
Kruger Construction
Over 20 hrs already on my little Kubota! • They say grease the loader every 8-10 hrs with normal use. I’m sure it’s a bit overkill • These are pins on bushings that I’m greasing not sealed bushings so don’t get wild. • 12 spots to grease on the loader alone. If you are running equipment this 18v Makita greasegun gets the job done quick @Makita Tools USA . . . #tools #construction #makitapartner #makita #kubota #kubotatractor
7.27M
72.31K
1%
1.82K
312
5.28K
Kruger Construction
Between the snowblower and snow plow we get a lot of rocks on the lawn over winter • Using this Makita paddle sweeper just makes it so easy to clean up • This is an attachment that goes into the 18v X2 power head @Makita Tools USA . . . #tools #construction #makita #makitatools #lawn #spring #cleanup #landscape
5.3M
28.72K
0.54%
1.05K
372
13.1K
Kruger Construction
Talk about a compact portable pressure washer! • This @EGO is the smallest I’ve seen with this type of pressure • 2100 psi with 1.2 gpm • You can hook it up to a hose or siphon from a bucket or jug • It really came handy when I had a vehicle in a car show and it rained all the way there, I rinsed it off with this and pulled into the building . . . #tools #construction #egopowerplus #pressurewasher #clean #cleaning #Summer #yardwork
5.04M
39.05K
0.77%
2.28K
572
3.64K
Kruger Construction
I thought I’d do a runtime test with the Makita 80v breaker but it didn’t even break a sweat • I can hardly believe it was still showing full batteries on both 8ah 40v’s • This thing hits hard and the Anti vibration technology (AVT) makes all the difference • Now it’s time for the worst part, cleaning this up @Makita Tools USA . . . #tools #construction #makita #makitapartner #makitatools #concrete
4.98M
24.45K
0.49%
699
410
2.56K
Kruger Construction
#ad Check out this Dewalt 20v Grabo! These are extremely helpful because you are able to add a handle to most flat surfaces • It can support up to 265 lbs. It also has an alarm to let you know if it’s losing suction. @DEWALT #dewaltpartner . . . #tools #construction #dewalt #dwtough
4.24M
57.41K
1.36%
2.27K
548
22.35K
Kruger Construction
Changing the taillights on the 4Runner is much easier than changing them on the front • These are the LUXX series from @AlphaRexUSA and as you can see it’s a couple bolts and they are completely plug and play • All that’s needed for this one is the @gearwrenchtools ratchet, extension and socket. Just make sure not to drop the nuts down the body or you are going to be doing some fishing • @4Runner Lifestyle has a big sale right now on AlphaRex lights . . . #tools #4runner #alpharex #gearwrench #building #overland
4.14M
75.21K
1.82%
1K
438
3.45K
Kruger Construction
No more heat shrink connections for me! • I saw this @SpliSeal.com @semashow and was sold on it! • The heatgun runs on @RYOBI Tools USA batteries which they include in the kit but I wanted to use the more powerful new Edge battery • Make you connection as it heats up, spray some mold release in the mold and put in your connection • Clamp it shut and inject the sealant. A minute later it’s ready to go • This will be clutch when I wire the @Diode Dynamics lights on the 4Runner, it even makes me want to redo all my wiring on the Tacoma . . . #tools #construction #tacoma #gearwrench #wiring #spliseal
3.88M
98.77K
2.54%
4.77K
1.44K
19.41K
Kruger Construction
I’ve been asked a lot if the silicone bucket liners like the @bucketsaver_ work for drywall mud • If you are looking for it to dry fully and fall out in a chunk like thinset it won’t, the bottom layer won’t dry • It does cleanup quick with a hose but it doesn’t completely dry • Running the @FLEXPOWERTOOLSNA mixer that we got before the tools were first originally released and it’s still going strong, I can’t imagine how many boxes of mud it’s mixed now as well as thinset, grout and even concrete . . . #tools #construction #flex #flexpartner #flexpowertools #drywall #drywaller
3.35M
24.06K
0.72%
143
106
601
Kruger Construction
Still a bit to cold to turn on the outside tap but I’m eager to try this Makita 40v pressure washer so I’ll use a bucket • On high hooked up to the house tap it will do 1,668 PSI and 1.85 GPM They say runtime of up to 60min with two 5.0Ah batteries • It comes with 2 nozzles, one adjustable one which I used on this video and then a turbo sprayer to get off the stubborn stuff • Once it warms up I will start washing some cars and post more on it @Makita Tools USA . . . #tools #construction #makita #makitapartner #wash #clean #pressurewashing
2.62M
20.97K
0.8%
1.12K
238
2.02K
Kruger Construction
Here’s the @SpliSeal.com hanger mold • This are a complete waterproof connection using a potting polymer. • I’m trying out this @felowerkzeugfabrik wire stripper I got from @KCITools It works really good on the 14g wire. It works on 24g-10g . . . #tools #construction #mechanic #wiring
2.5M
55.6K
2.23%
1.4K
412
5.76K
Kruger Construction
Here we go! Got a Topogrphic Pro Grille for the 4Runner from @Taco Vinyl • Super straight forward to put on but the little factory clips are an absolute pain to release, the @gearwrenchtools pick set absolutely saved the day . . . #tools #gearwrench #gearwrenchtools #mechanic #4runner #tacovinyl #toyota #toyota4runner
2.18M
26.85K
1.23%
342
195
1.06K
Kruger Construction
Let the 4Runner build begin! Last year we teamed up with @gearwrenchtools to do a 2023 Tacoma that we took to @SEMA Show • This year we are doing a 2021 4Runner • First we gotta change these headlight to the @AlphaRexUSA Nova series Way brighter and they have a very cool startup sequence and daytime running light • Funny that once again we had to pull the bumper to change the headlight assembly but it was pretty easy and as you guys know I really enjoy working on vehicles with my Dad • A lot more to come every Saturday! We have teamed up with @4Runner Lifestyle for a lot of cool parts . . . #tools #mechanic #4runner #4runnerlifestyle #alpharexusa #gearwrench #gearwrenchtools #builtnotbought
1.86M
20.31K
1.09%
374
166
746
Kruger Construction
This is genius! Continues Bag system from @Hilti North America • I wanted to show that even with super fine dust the filter won’t plug up because it taps itself out well working • There is now no pulling the vac apart to clean out the canister, just zip tie the bottom of the bag, cut it and get back to work! • This system worked amazing for grinding floors and I know it would work the same for drywall dust . . . #tools #construction #Hilti #hiltitools #hiltipartner #flooring #concrete
1.66M
16.46K
0.99%
295
200
2.21K
Kruger Construction
I finally put a cap on my worktruck • I went with the @smartcap EVOa Adventure • It comes in a box and has some assembly. The most important part is to torque it properly. That’s where the @gearwrenchtools 1/4” 120xp 30-200 in/lbs torque wrench comes in handy • This cap is powder coated stainless steel and has a vent up top to make positive pressure while driving so you don’t get dust inside • More to come on this work truck build . . . #tools #construction #Gearwrench #gearwrenchpartner #smartcap #ford #fordraptor #worktruck
1.4M
14.02K
1%
240
129
1.15K
Kruger Construction
I can now confirm that the @kinetic.customs Titanium Nighthawk is even nicer in person • Made sure I followed their instruction by torquing the bolt to 29.5 ft-lb with the @gearwrenchtools torque wrench • Little bit of a Optimus Prime vibe going on here with the colors I picked . . . #tools #construction #hammer #titanium #gearwrench #workofart #kineticcustoms #titaniumhammer
1.32M
7.69K
0.58%
69
107
226
Kruger Construction
Here’s the @PeakSuspension summit front suspension that I put on the 4Runner • These are adjustable and have it the lift I needed to fit the bigger wheels • The kit also comes with an upper control arm. • The ride from the previous shocks is night and day. Super smooth for daily driving and great articulation and handles the trails with ease! • Great part is these are aluminum so they won’t be rusting like other brands over a couple winters • After I torque with the @gearwrenchtools wrench I give a quick mark with a paint pen so I know it’s been done. I tend to second guess myself. You can get this setup @4Runner Lifestyle . . . #tools #mechanic #gearwrench #gearwrenchtools #peaksuspension #offroad #4runner #4runnerlifestyle
1.25M
15.48K
1.23%
769
107
558
Kruger Construction
We’ve all had nails blow out the side of material • Try turning your nailer 90° and it will likely not happen. Pins, Brad and some finishing nails have a chiseled end so sometimes they take off to the side. • Here’s the @FLEXPOWERTOOLSNA 16g 20° finish nailer, quick depth adjustment and lots of lights on this. The tiny 2.0 stacked battery keeps the weight down . . . #tools #construction #flexpowertools #carpentry
1.23M
13.79K
1.12%
1.24K
152
911
Kruger Construction
Today we measure things by hand • As you can see this 16-5/16 blade on this Cordless 40v XGT saw is massive! • 6-1/4 cutting capacity at 90° and 4-3/16 at 45° This saw is now available in North America @Makita Tools USA . . . #tools #construction #makita #makitatools #framing
1.01M
13.4K
1.33%
364
149
1.91K
Kruger Construction
Installed some aluminum exhaust ports for these bay doors @ExceedAutomotive • Used a @SpyderProducts 4-1/2” tarantula holesaw and as you can see it made quick work, it’s nice not having to dig the material out either • Used this absolute powerhouse @Hilti North America 4 speed drill, Hilti has one of the best anti kickback systems I’ve used but I still like to run the side handle with the type of power this drill puts out • Now they can run cars with the hose hooked up to the exhaust while keeping the doors closed . . . #tools #construction #automotive #mechanic #hiltipartner #spyderpartner #spyderproducts #hilti #hiltitools
979.22K
4.92K
0.5%
27
67
116
يرجى الانضمام إلى مجموعة TikTok Inspiration على Facebook
سنشارك أحدث مقاطع الفيديو الإبداعية ويمكنك مناقشة أي أسئلة لديك مع الجميع!
TiktokSpy from IXSPY
أدوات رقمية للمؤثرين والوكالات والمعلنين والعلامات التجارية.
شركة خارجية مستقلة ، وليس موقع TikTok الرسمي.
Copyright@2021 ixspy.com. All Rights Reserved